Options Guide
Visual reference for every parameter, rendered from the model at 2.0.0.
A self-contained HTML version with the images embedded is at options-guide.html; it works offline.
For the exhaustive parameter tables, see PARAMETER_REFERENCE.md.
Overall
Section titled “Overall”What gets generated.
Box Only
Section titled “Box Only”Part_To_Render=Box Only

Lid Only
Section titled “Lid Only”Part_To_Render=Lid Only

Box and Lid
Section titled “Box and Lid”Part_To_Render=Box and Lid

Shell dimensions and wall.
Default 100 x 75 x 50
Section titled “Default 100 x 75 x 50”
Wide: 200 x 75 x 50
Section titled “Wide: 200 x 75 x 50”Box_Width=200

Tall: 100 x 75 x 90
Section titled “Tall: 100 x 75 x 90”Box_Height=90

Corner radius 2 (crisp)
Section titled “Corner radius 2 (crisp)”Box_Corner_Radius=2

Corner radius 8.1 (default)
Section titled “Corner radius 8.1 (default)”
Corner radius 25 (soft)
Section titled “Corner radius 25 (soft)”Box_Corner_Radius=25

Wall 1.2 mm
Section titled “Wall 1.2 mm”Wall_Thickness=1.2

Wall 3.0 mm
Section titled “Wall 3.0 mm”Wall_Thickness=3.0

Centre post
Section titled “Centre post”The cable-wrapping core.
Post enabled (default)
Section titled “Post enabled (default)”
Post disabled
Section titled “Post disabled”Enable_Post=false

Post diameter 30
Section titled “Post diameter 30”Post_Diameter=30

Closed_Post: solid floor under the post
Section titled “Closed_Post: solid floor under the post”Closed_Post=true

Fit and engagement.
Default lid: Lid_Style Plug, a ring inside the wall
Section titled “Default lid: Lid_Style Plug, a ring inside the wall”Part_To_Render=Lid Only

Lid_Style Skirt wraps the box
Section titled “Lid_Style Skirt wraps the box”Part_To_Render=Lid Only, Lid_Style=Skirt

Lid_Height 16
Section titled “Lid_Height 16”Part_To_Render=Lid Only, Lid_Height=16

Lid_Lip_Gap_Height 8
Section titled “Lid_Lip_Gap_Height 8”Part_To_Render=Lid Only, Lid_Lip_Gap_Height=8

Edges, lid grip and magnets
Section titled “Edges, lid grip and magnets”Optional finishing features. All are off by default.
Bottom_Edge_Fillet 1.5
Section titled “Bottom_Edge_Fillet 1.5”Bottom_Edge_Fillet=1.5

Bottom_Edge_Style Teardrop: meets the bed at 45 degrees
Section titled “Bottom_Edge_Style Teardrop: meets the bed at 45 degrees”Bottom_Edge_Fillet=1.5, Bottom_Edge_Style=Teardrop

Bottom_Edge_Style Chamfer
Section titled “Bottom_Edge_Style Chamfer”Bottom_Edge_Fillet=1.5, Bottom_Edge_Style=Chamfer

Top_Edge_Chamfer 0.8
Section titled “Top_Edge_Chamfer 0.8”Top_Edge_Chamfer=0.8

Lid_Relief_Style Scallop
Section titled “Lid_Relief_Style Scallop”Part_To_Render=Lid Only, Lid_Relief_Style=Scallop

Lid_Relief_Style Tab
Section titled “Lid_Relief_Style Tab”Part_To_Render=Lid Only, Lid_Relief_Style=Tab

Enable_Lid_Magnets: corner bosses
Section titled “Enable_Lid_Magnets: corner bosses”Enable_Lid_Magnets=true

Side openings
Section titled “Side openings”Where cables enter and leave.
Default: 10 wide x 30 tall, 5 up from the floor
Section titled “Default: 10 wide x 30 tall, 5 up from the floor”
Width 30
Section titled “Width 30”All_Opening_Width=30

Height 15
Section titled “Height 15”All_Opening_Height=15

All_Openings_Up 0: flush with the floor
Section titled “All_Openings_Up 0: flush with the floor”All_Openings_Up=0

All_Openings_Up 12: lifted further off the floor
Section titled “All_Openings_Up 12: lifted further off the floor”All_Openings_Up=12

Corner radius 0: square corners
Section titled “Corner radius 0: square corners”All_Opening_Corner_Radius=0

Corner radius -1: fully rounded (default)
Section titled “Corner radius -1: fully rounded (default)”
All_Opening_Top_Style Teardrop: tops print without support
Section titled “All_Opening_Top_Style Teardrop: tops print without support”All_Opening_Width=20, All_Opening_Top_Style=Teardrop

Front and back only
Section titled “Front and back only”Opening_On_Left=false, Opening_On_Right=false

Per-side override: wide front opening
Section titled “Per-side override: wide front opening”Override_Opening_Width_Front=40, Override_Opening_Height_Front=20

Stabilizer fins
Section titled “Stabilizer fins”Interior ribs that stiffen the walls.
Disabled
Section titled “Disabled”Enable_Stabilizers=false

3 fins, centred (default)
Section titled “3 fins, centred (default)”
5 fins, distributed
Section titled “5 fins, distributed”Stabilizers_Front_Back_Count=5, Stabilizers_Front_Back_Alignment=Distributed

All four walls
Section titled “All four walls”Stabilizers_Left_Right_Count=2

Taller and deeper fins
Section titled “Taller and deeper fins”Stabilizer_Height=44, Stabilizer_Depth=22

Floor openings
Section titled “Floor openings”Cutouts through the box floor.
Disabled (default)
Section titled “Disabled (default)”
3 openings along X
Section titled “3 openings along X”Enable_Bottom_Openings=true

Arranged along Y
Section titled “Arranged along Y”Enable_Bottom_Openings=true, Bottom_Opening_Axis=Along Y

6 openings, distributed
Section titled “6 openings, distributed”Enable_Bottom_Openings=true, Bottom_Openings_Count=6, Bottom_Opening_Alignment_Primary=Distributed

Slicing for small beds
Section titled “Slicing for small beds”Split the model into pieces that push together. Floor clips hold them in line, and 45-degree teeth in the walls hold them level.
2 pieces, preview layout
Section titled “2 pieces, preview layout”Enable_Slicing=true, Slice_Count=2, Part_To_Render=Box Only

3 pieces
Section titled “3 pieces”Enable_Slicing=true, Slice_Count=3, Part_To_Render=Box Only

Exporting a single piece
Section titled “Exporting a single piece”Enable_Slicing=true, Slice_Count=2, Slice_Piece_To_Render=1, Part_To_Render=Box Only

4 clips per seam
Section titled “4 clips per seam”Enable_Slicing=true, Slice_Count=2, Clips_Per_Edge=4, Part_To_Render=Box Only

Flat seam, without teeth
Section titled “Flat seam, without teeth”Enable_Slicing=true, Slice_Count=2, Seam_Tooth_Depth=0, Part_To_Render=Box Only

Gridfinity
Section titled “Gridfinity”Optional interfaces. The box is shown from below, where its feet are, and the lid from above, where its pockets are.
Disabled (default)
Section titled “Disabled (default)”Closed_Post=true

Feet under the box, rounded up to whole cells
Section titled “Feet under the box, rounded up to whole cells”Enable_Gridfinity_Bottom=true, Closed_Post=true

Baseplate pockets on the lid
Section titled “Baseplate pockets on the lid”Enable_Gridfinity_Lid_Top=true, Part_To_Render=Lid Only

Both, with magnet and screw holes
Section titled “Both, with magnet and screw holes”Enable_Gridfinity_Bottom=true, Enable_Gridfinity_Lid_Top=true, Closed_Post=true, Enable_Gridfinity_Magnet_Screw=true

Generated by scripts/build_options_guide.py. Rebuild after model changes.