Skip to content

Multi-port USB-C charger

← All presets

A GaN multi-port charger and 4 to 6 USB-C cables.

Preview

262.0 x 79.0 x 45.0 mmdrag to orbit, scroll to zoom

Downloads

PartSizeSTLGLB
Box Only120.0 x 75.0 x 45.0 mmSTL (234 KB)GLB (25 KB)
Lid Only124.0 x 79.0 x 11.1 mmSTL (142 KB)GLB (16 KB)
Box and Lid262.0 x 79.0 x 45.0 mmSTL (376 KB)GLB (40 KB)

config.json (256 bytes) is OpenSCAD's native parameter-set format. From the command line, load it with -p and -P usb-charger. The Customizer reads cable-box-parametric.json when it sits beside the model, and lists every preset in one dropdown.

Print each part in the orientation it was exported in, in PLA or PETG, at a 0.20 mm layer height with three or more walls and a 0.4 mm nozzle. The printing guide explains which face lands on the bed, gives a small fit test box to print first, and records which features have been printed on a real machine.

Parameters

These are the overrides that make this preset. Everything not listed uses the model default, and the full list of defaults is in the parameter reference.

ParameterValueDefault
All_Opening_Height2630
All_Opening_Width1210
Box_Depth7575
Box_Height4550
Box_Width120100
Post_Diameter1215

Rebuild this preset

python scripts/build_library.py --only usb-charger

Generated from cable-box-parametric.scad 2.0.0. Files under library/ are overwritten by that script, so edit the preset's entry in scripts/build_library.py rather than the output.