Skip to content

Six-outlet surge protector

← All presets

A standard 6-outlet strip up to ~250 x 60 mm, with its cord.

Preview

552.0 x 104.0 x 62.0 mmdrag to orbit, scroll to zoom

Downloads

PartSizeSTLGLB
Box Only265.0 x 100.0 x 62.0 mmSTL (242 KB)GLB (26 KB)
Lid Only269.0 x 104.0 x 11.1 mmSTL (142 KB)GLB (16 KB)
Box and Lid552.0 x 104.0 x 62.0 mmSTL (383 KB)GLB (41 KB)

config.json (273 bytes) is OpenSCAD's native parameter-set format. From the command line, load it with -p and -P surge-strip-6. The Customizer reads cable-box-parametric.json when it sits beside the model, and lists every preset in one dropdown.

Print each part in the orientation it was exported in, in PLA or PETG, at a 0.20 mm layer height with three or more walls and a 0.4 mm nozzle. The printing guide explains which face lands on the bed, gives a small fit test box to print first, and records which features have been printed on a real machine.

Parameters

These are the overrides that make this preset. Everything not listed uses the model default, and the full list of defaults is in the parameter reference.

ParameterValueDefault
All_Opening_Height3830
All_Opening_Width2010
Box_Depth10075
Box_Height6250
Box_Width265100
Stabilizers_Front_Back_Count53

Rebuild this preset

python scripts/build_library.py --only surge-strip-6

Generated from cable-box-parametric.scad 2.0.0. Files under library/ are overwritten by that script, so edit the preset's entry in scripts/build_library.py rather than the output.