Six-outlet strip, split for a 180 mm bed
Same as surge-strip-6, printed in two halves that clip together.
Sliced x2
Assembled box: 265.0 x 100.0 x 62.0 mm · Largest printed piece: 136.5 x 100.0 x 62.0 mm (includes protruding clips)
Preview
274.0 x 222.0 x 62.0 mmdrag to orbit, scroll to zoom
Downloads
| Part | Size | STL | GLB |
|---|---|---|---|
| Box Only | 270.0 x 100.0 x 62.0 mm | STL (410 KB) | GLB (43 KB) |
| Lid Only | 274.0 x 104.0 x 11.1 mm | STL (175 KB) | GLB (19 KB) |
| Box and Lid | 274.0 x 222.0 x 62.0 mm | STL (584 KB) | GLB (62 KB) |
config.json (367 bytes) is OpenSCAD's native parameter-set format. From the command line, load it with -p and -P surge-strip-6-sliced. The Customizer reads cable-box-parametric.json when it sits beside the model, and lists every preset in one dropdown.
Print it
Print each part in the orientation it was exported in, in PLA or PETG, at a 0.20 mm layer height with three or more walls and a 0.4 mm nozzle. The printing guide explains which face lands on the bed, gives a small fit test box to print first, and records which features have been printed on a real machine.
Parameters
These are the overrides that make this preset. Everything not listed uses the model default, and the full list of defaults is in the parameter reference.
| Parameter | Value | Default |
|---|---|---|
| All_Opening_Height | 38 | 30 |
| All_Opening_Width | 20 | 10 |
| Box_Depth | 100 | 75 |
| Box_Height | 62 | 50 |
| Box_Width | 265 | 100 |
| Clips_Per_Edge | 3 | 2 |
| Enable_Slicing | true | false |
| Slice_Count | 2 | 2 |
| Stabilizers_Front_Back_Count | 5 | 3 |
Rebuild this preset
python scripts/build_library.py --only surge-strip-6-slicedGenerated from cable-box-parametric.scad 2.0.0. Files under library/ are overwritten by that script, so edit the preset's entry in scripts/build_library.py rather than the output.