Skip to content

Router and modem shelf tidy

← All presets

A small router or modem plus its PSU. Tall openings for stiff coax and ethernet.

Preview

482.0 x 134.0 x 75.0 mmdrag to orbit, scroll to zoom

Downloads

PartSizeSTLGLB
Box Only230.0 x 130.0 x 75.0 mmSTL (260 KB)GLB (28 KB)
Lid Only234.0 x 134.0 x 11.1 mmSTL (142 KB)GLB (16 KB)
Box and Lid482.0 x 134.0 x 75.0 mmSTL (401 KB)GLB (43 KB)

config.json (315 bytes) is OpenSCAD's native parameter-set format. From the command line, load it with -p and -P router-shelf. The Customizer reads cable-box-parametric.json when it sits beside the model, and lists every preset in one dropdown.

Print each part in the orientation it was exported in, in PLA or PETG, at a 0.20 mm layer height with three or more walls and a 0.4 mm nozzle. The printing guide explains which face lands on the bed, gives a small fit test box to print first, and records which features have been printed on a real machine.

Parameters

These are the overrides that make this preset. Everything not listed uses the model default, and the full list of defaults is in the parameter reference.

ParameterValueDefault
All_Opening_Height4530
All_Opening_Width2210
Box_Depth13075
Box_Height7550
Box_Width230100
Stabilizers_Front_Back_Count43
Stabilizers_Left_Right_Count20

Rebuild this preset

python scripts/build_library.py --only router-shelf

Generated from cable-box-parametric.scad 2.0.0. Files under library/ are overwritten by that script, so edit the preset's entry in scripts/build_library.py rather than the output.