Skip to content

Dual-monitor cable junction

← All presets

Two monitor power bricks and their signal cables.

Preview

442.0 x 99.0 x 62.0 mmdrag to orbit, scroll to zoom

Downloads

PartSizeSTLGLB
Box Only210.0 x 95.0 x 62.0 mmSTL (244 KB)GLB (26 KB)
Lid Only214.0 x 99.0 x 11.1 mmSTL (142 KB)GLB (16 KB)
Box and Lid442.0 x 99.0 x 62.0 mmSTL (385 KB)GLB (41 KB)

config.json (275 bytes) is OpenSCAD's native parameter-set format. From the command line, load it with -p and -P monitor-junction. The Customizer reads cable-box-parametric.json when it sits beside the model, and lists every preset in one dropdown.

Print each part in the orientation it was exported in, in PLA or PETG, at a 0.20 mm layer height with three or more walls and a 0.4 mm nozzle. The printing guide explains which face lands on the bed, gives a small fit test box to print first, and records which features have been printed on a real machine.

Parameters

These are the overrides that make this preset. Everything not listed uses the model default, and the full list of defaults is in the parameter reference.

ParameterValueDefault
All_Opening_Height3630
All_Opening_Width1810
Box_Depth9575
Box_Height6250
Box_Width210100
Stabilizers_Front_Back_Count43

Rebuild this preset

python scripts/build_library.py --only monitor-junction

Generated from cable-box-parametric.scad 2.0.0. Files under library/ are overwritten by that script, so edit the preset's entry in scripts/build_library.py rather than the output.