Skip to content

Laptop brick and cables

← All presets

One laptop charger up to ~150 x 75 x 40 mm, plus 3 cables.

Preview

372.0 x 109.0 x 70.0 mmdrag to orbit, scroll to zoom

Downloads

PartSizeSTLGLB
Box Only175.0 x 105.0 x 70.0 mmSTL (244 KB)GLB (26 KB)
Lid Only179.0 x 109.0 x 11.1 mmSTL (143 KB)GLB (16 KB)
Box and Lid372.0 x 109.0 x 70.0 mmSTL (385 KB)GLB (41 KB)

config.json (272 bytes) is OpenSCAD's native parameter-set format. From the command line, load it with -p and -P laptop-brick. The Customizer reads cable-box-parametric.json when it sits beside the model, and lists every preset in one dropdown.

Print each part in the orientation it was exported in, in PLA or PETG, at a 0.20 mm layer height with three or more walls and a 0.4 mm nozzle. The printing guide explains which face lands on the bed, gives a small fit test box to print first, and records which features have been printed on a real machine.

Parameters

These are the overrides that make this preset. Everything not listed uses the model default, and the full list of defaults is in the parameter reference.

ParameterValueDefault
All_Opening_Height3830
All_Opening_Width1610
Box_Depth10575
Box_Height7050
Box_Width175100
Stabilizers_Front_Back_Count43

Rebuild this preset

python scripts/build_library.py --only laptop-brick

Generated from cable-box-parametric.scad 2.0.0. Files under library/ are overwritten by that script, so edit the preset's entry in scripts/build_library.py rather than the output.