Skip to content

Gridfinity desk module

← All presets

Sits in a Gridfinity baseplate on a 3 x 2 cell footprint.

Gridfinity baseGridfinity lid topClosed post

Preview

273.0 x 87.5 x 59.8 mmdrag to orbit, scroll to zoom

Downloads

PartSizeSTLGLB
Box Only125.5 x 83.5 x 59.8 mmSTL (648 KB)GLB (64 KB)
Lid Only129.5 x 87.5 x 16.1 mmSTL (613 KB)GLB (59 KB)
Box and Lid273.0 x 87.5 x 59.8 mmSTL (1.2 MB)GLB (123 KB)

config.json (351 bytes) is OpenSCAD's native parameter-set format. From the command line, load it with -p and -P gridfinity-module. The Customizer reads cable-box-parametric.json when it sits beside the model, and lists every preset in one dropdown.

Print each part in the orientation it was exported in, in PLA or PETG, at a 0.20 mm layer height with three or more walls and a 0.4 mm nozzle. The printing guide explains which face lands on the bed, gives a small fit test box to print first, and records which features have been printed on a real machine.

Parameters

These are the overrides that make this preset. Everything not listed uses the model default, and the full list of defaults is in the parameter reference.

ParameterValueDefault
All_Opening_Height3030
All_Opening_Width1410
Box_Depth83.575
Box_Height5550
Box_Width125.5100
Closed_Posttruefalse
Enable_Gridfinity_Bottomtruefalse
Enable_Gridfinity_Lid_Toptruefalse

More views

Rebuild this preset

python scripts/build_library.py --only gridfinity-module

Generated from cable-box-parametric.scad 2.0.0. Files under library/ are overwritten by that script, so edit the preset's entry in scripts/build_library.py rather than the output.